Great Planes Electrifly Repair Part 8A Brushless ESC Silver Series GPMM1800

$52.28 $35.36

Great Planes Electrifly Repair Part 8A Brushless ESC Silver Series GPMM1800

2 in stock


This is the ElectriFly Silver Series 8A Brushless Electronic Speed Control. Great for small, lightweight, high performance airplanes from flat-foams to built-up 3Ds. Great for Outrunner style Brushless Motors, delivering 8A of continuous current with a built-in Battery Eliminator Circuit which can handle 1.5A. Simple to use and very affordable.


Compatible with NiCd, NiMH and LiPo batteries

Auto-detects input volts and sets Low-Voltage cutoff

8.5kHz switching frequency, for good run-time and cool operation

Pre-installed Universal radio connector* (see Comments below)

Pre-installed polarized micro connector for battery

Pre-installed gold plated 2mm female bullet connectors for motor

High powered switching BEC (Battery Eliminator Circuitry) which handles 2 or 3 micro servos (4 if adequate airflow is provided)

Full proportional forward and smooth throttle response with ON/OFF brake Safe Start System** (see details in Comments below)

Thermal Protection stops motor when maximum temperature 230°F is reached


Mating motor connectors, GPMM3110

Mating battery connector, WSDM3007


Length: 1.18″ (30mm)

Width: .79″ (20mm)

Height: .24″ (6mm)

Weight: .39oz (11g

) Input Voltage: 6-12 cells NiCd/NiMH 2-4 cells LiPo (20V input w/o BEC)

Output Current: 8A continuous maximum 10A surge maximum

Max Output Power: 100 watts

On-resistance: .05 ohms

Operating frequency: 8.5kHz

BEC: 5V/1.5A

Low Voltage Cutoff: Battery voltage x .67

Thermal Cutoff: 230°F (110°C)

Timing Angle: 12°

Brake: ON/OFF